I have an Asrock AliveNF7G-FullHD rev 3 motherboard. I had a striped raid 0 on two 750gb hd's. I added two 1.5T and could not recognize them in xp because the bios was set to "raid" mode. I tried to make 2 one drive raids and that failed too. In the process of deleting those raids, I accidentally deleted the main system drive raid. The bios utility has no way to rebuild the array. It only asks me if I want to make a new raid and delete the old data. the drives have not been touched yet. The drives work fine and the data on them is still intact. I am trying to find a way to either dump the data on another single disk (one of the 1.5T's) and make that disk bootable or to rebuild the array and make that bootable. I have unpluged them and installed a version of winxp on one of the 1.5T's hoping to find software that will either recover the array intact or to pull the data off of it. I know I'm a dummy for using raid 0, but the 1.5T's were intended to replace the raid 0 array to a single disk and to mirror it. Asrock of course has no information either on their website or on the install disk, nor has google been a help, and this is probably my last Asrock mobo ever (my Asus's would have just rebuilt the array but they are dead). I'd like to see if there are any free fixes before I shell out 100 for a raid recovery program. Any advise would be greatly appreciated.