Added a M2 drive and get Bluescreens in one program

Mathias_20

Commendable
Jan 16, 2017
5
0
1,510
0
My system:
OS disks 2x WD Green SSD Raid:0
Hitachi HDD Sorage
Seagate HDD storage

Then all worked fine.

Added an M2 Samsung EVO 970

Now one program gives me Bluescreens regarding :
storport.sys
But mostly regarding:
ntoskrnl.exe

Read a few previous posts regarding user had to turn off the Raid in Bios.
Dont really think that will work for me as I need it in Raid:0 for my OS disks.

But rest of bios is allready set to also support nvme m2 drives.

Everything seems to work allright.
Just this one program acting up.
Also tried to update the m2 nvme drivers, bit it wont let me as everything is up to date.

Any suggestions?
One option is to reinstall win on the m2 drive instead offcourse, but can not do that right now.
Just looking to see if there is a setting I missed or something I should have done that you might know about?


Eventually it will be an os disk tho, will gain alittle on the speeds afterall. Then again, could I still run my ssd's in any raid options at the same time?
 

ASK THE COMMUNITY

TRENDING THREADS