Adding the same exact model. 2 more 8gb sticks of T-Force Dark DDR4 3000 to my current build that's already housing as many.
When first installed, I get: "cpu or memory changed. Press f1 to setup or f2 to continue". (Something along those lines)
I go into setup, set the dram freq to auto, save and exit. Doesn't boot from there. Power cycle: no boot.
If I take the sticks out, brings that up again, I set autos, and it boots.
Just now I tried each of the new sticks on their own, just a standard 8gb dimm 2 slot. After the setup, boots fine.
Tried booting with the 2 new sticks in dimm 2 and 4. No setup pop up, just the original problem of no signal to monitor but full fan spins and all that.
Tried new stick #1 with old stick #1, (dimm 2 and 4 respectively) booted without setup (after previously being configured for 1 stick).
Tried new stick #2 with old stick #1 (dimm 2 and 4 respectively) no setup, no boot.
Tried new stick #2 with old stick #2, (proper dimms) no setup no boot.
Flashed the bios, retried. Still nothing.
Soooo... I don't have a dead stick, but it does seem like new stick #2 doesn't play well with others... am I missing something, or am I returning for new sticks?
Mobo: MSI Z370 SLI Plus
CPU: i7-8700k
I'm not sure the rest of the specs really matter here but I got it all if needed.
When first installed, I get: "cpu or memory changed. Press f1 to setup or f2 to continue". (Something along those lines)
I go into setup, set the dram freq to auto, save and exit. Doesn't boot from there. Power cycle: no boot.
If I take the sticks out, brings that up again, I set autos, and it boots.
Just now I tried each of the new sticks on their own, just a standard 8gb dimm 2 slot. After the setup, boots fine.
Tried booting with the 2 new sticks in dimm 2 and 4. No setup pop up, just the original problem of no signal to monitor but full fan spins and all that.
Tried new stick #1 with old stick #1, (dimm 2 and 4 respectively) booted without setup (after previously being configured for 1 stick).
Tried new stick #2 with old stick #1 (dimm 2 and 4 respectively) no setup, no boot.
Tried new stick #2 with old stick #2, (proper dimms) no setup no boot.
Flashed the bios, retried. Still nothing.
Soooo... I don't have a dead stick, but it does seem like new stick #2 doesn't play well with others... am I missing something, or am I returning for new sticks?
Mobo: MSI Z370 SLI Plus
CPU: i7-8700k
I'm not sure the rest of the specs really matter here but I got it all if needed.