Adding extra USB3 to Z77-DS3H

[funkytwig]

I have the above motherboard and noticed it has a USB3 header. The board only has 2 USB3 ports so was wondering if it was possible to get a plate that goes in one of the expansion port holes at back to give me extra USB3 using the header. I do a similar thing for eSATA. Had a look and cat find any, do they exist? Would not mind having an external box tyoe thing with USB3 ports that goes through a hole in back of case.

 

[4745454b]

It's for your case. If you have a new enough case it should have USB 3 ports on the front that plug into that plug on the board next to the ram. I don't recall seeing any USB 3 brackets for the back of the case, though there isn't a reason why there couldn't be one.

 

[USAFRet]

I have the above motherboard and noticed it has a USB3 header. The board only has 2 USB3 ports so was wondering if it was possible to get a plate that goes in one of the expansion port holes at back to give me extra USB3 using the header. I do a similar thing for eSATA. Had a look and cat find any, do they exist? Would not mind having an external box tyoe thing with USB3 ports that goes through a hole in back of case.

PCI-e - USB 3.0
http://www.amazon.com/Anker®-Express-Connector-Desktops-Chipset/dp/B005ARQV6U
4 USB 3.0 ports, $20