Adding same ram blue screen

[Remi__]

I just added the exact same and same amount of ram into my comp. Old ram was working before, new ram runs fine on it's own too. Somehow all 4 together i go blue screen after 2 minutes into desktop. Everytime. I have just updated Bios, because with all 4 i previously got infinity loop. Now i can startup, but get blue screen. Bios is updated to the newest. Any ideas? All other hardware works fine.

So i went from 2 x 4gb corsair vengeance, to 4 x 4gb corsair vengeance, same voltage, same frequenties, same brand offc. The only thing different about these rams is the version, so i guess just the date. Two are 4;45 and the others 2 8;35, but that has to do with manufacturing date, I think. Also windows recognized that i have 16gb ram when i enter. I have Gigabyte G1.sniper B5 motherboard and 1060 GTX nvidia. As far as i know all 4 sticks work and arent damaged, is it a compatibility issue? I have read more people having problems with stacking all 4 slots.

Yet if i run diagnostics it says hardware is damaged and even the diagnostics doesn't finish. So from my point of view it's just not working with all 4 of the slotted. You guys got any ideas?

 

[Supahos]

Try bumping dram voltage up .05v anytime you mix kits this is a possibility. They sell ram in kits this o guarantee compatibility

 

[Remi__]

Try bumping dram voltage up .05v anytime you mix kits this is a possibility. They sell ram in kits this o guarantee compatibility

How can i do that? any tutorial videos? ^^
And those extra voltages won't hurt, in case that's not the problem?

Also i'm not mixing kits, i think ^^. I'm kind of out of my depth here . It's the exact same ram, same brand, same kind.

 

[Supahos]

Just go into the bios. There will be a section for the ram. Find the voltage and raise it .05 should be 1.5v most likely right now so make it 1.55

 

[Remi__]

Hi I bumped it and i keep getting blue screens, i'm surviving a bit longer though ^^. But max 5 mins. Bumped dram voltage to 1560V, evening out at 1548V.

System thread extortion, non page failure are most common blue screens atm.

 

[Remi__]

Just go into the bios. There will be a section for the ram. Find the voltage and raise it .05 should be 1.5v most likely right now so make it 1.55

Hi I bumped it and i keep getting blue screens, i'm surviving a bit longer though ^^. But max 5 mins. Bumped dram voltage to 1560V, evening out at 1548V. I only have option 1540 or 1560

System thread extortion, non page failure, ntfs.sys are most common blue screens atm. I'm not having any trouble in safe mode though. But is that because i can't use much of the ram in that case or could it be driver-software related maybe?

 

[Supahos]

Do you have the same kits in the same colored slots? Like the ones that came together? That makes it more likely to work. The other thing you can do is loosen the timings. (Don't know exactly what kit you have but numbers will look like 9-9-9-26 or something. Add 1 to the first three numbers and 3 to the 4th number if you try it) You can also try 1.60v still won't hurt anything.

 

[Remi__]

Do you have the same kits in the same colored slots? Like the ones that came together? That makes it more likely to work. The other thing you can do is loosen the timings. (Don't know exactly what kit you have but numbers will look like 9-9-9-26 or something. Add 1 to the first three numbers and 3 to the 4th number if you try it) You can also try 1.60v still won't hurt anything.

Same kits and same colored slots, i always put in and out the same version. But if it keeps being a pain in the ass i'll gonna have to double check it i guess . Any idea why i don't get blue screen in safe mode? or is that normal?

K i'll bump up the volts a bit again and i have 9-9-9-24 timers so i'll put it on 10-10-10-27

 

[Supahos]

I'm not sure I have ever blue screened in safe mode that's kind of the point. It runs everything in full out base mode. Slower but the whole point is to give you somewhere to fix problems while in the os

 

[Remi__]

I'm not sure I have ever blue screened in safe mode that's kind of the point. It runs everything in full out base mode. Slower but the whole point is to give you somewhere to fix problems while in the os

adjusted voltages again, changed timers. Got Blue screen memory management after 5 mins.

Memory management blue screen keeps returning now. 3 times in a row. Together with page fault in non paged area.

 

[Supahos]

Well at this point it's safe to say the memory won't play well together. Time to sell it.

 

[Remi__]

Well at this point it's safe to say the memory won't play well together. Time to sell it.

bullocks 130 euros down the drain, where u sell something like this. I still have new ram ^^. But how can it not work together, it's the same ram. all 4 stacks vengeance LP. i'm gonna take 2 out and it's huge pain in the ass because a part of my fan is in the way of my ram, so i have to remove that first. ffs. So typical me, i bought this like 2 months ago, wanted to wait for someone to do it together. Now i see it's useless and i lost all warranty or whatever. $sigh$ Well i'm never putting in 4 stacks again, next time i'll just buy 2 of 8 gigs. FUCK! thx anyway dude

 

[Remi__]

I mean how can you go wrong buying the exact same stack of ram you already use. This is just bs

 

[Supahos]

4 sticks are fine, the issue is they came from 2 different packs. A 4*4gb kit bought together would likely work together