Adjusting CPU/NB Ratio

[Jake_Green]

Hello,
So I have a pretty stable Overclock right now with my FSB at 103.00, my multiplier at 43x, and my voltage at 1.449V. This brings my clock speed up to 4.428Ghz. (Standard is FSB 100.00, multiplier at 36x, and voltage ~1.36V which equals 3.6Ghz)

I have my CPU/NB ratio set to (Auto) right now and it is around 1650. This is equal to manually setting the ratio to 16. What will it do for me to raise this? Will my overclock remain stable? Should i keep this on Auto? How much can i raise it if it is recommended for me to do so?

Thank you

 

[nickbachu]

i think you should keep it on auto but if you want it to be manual you have to figure out your temperature and how high it goes and also if you do rasie it if you will pass the max temps with it

 

[Jake_Green]

Well the thing is ny temps are extrodinarily low for having such a high voltage and a decently high overclock. Even when running Prime95 i haven't seen my CPU temp go over 43C. My processor has a max temp of 70C, but I'd like to keep it below 60C for long term health and safe measure. Still there is room for it to rise quite a bit. Do you think i could mess with it and start slowly bumping it up? What is the CPU/NB ratio for exactly? What will it do for me to raise it?