Adtio Setup Utility

[Victoria_28]

Hi I have a MSI Gaming G series. I upgraded to windows 10.. two weeks later it went to the Aptio Setup Utility Copy right (c) 2012 American Megarends, Inc.
I have tried many things like disabling the secure boot control and saving then spamming F9 for 10 seonds... to turning on the computer spamming enter or F1, F2, Enter, trying to also pressing esc and holding down delete. I called windows to tell them what was going on they continually just said "call MSI and claim your warranty" and did nothing to help.
Can someone please help me no matter what I do I just end up at this screen and nothing else comes up.

Thank you!

 

[webworkings]

Try the following and see if it resolves the problem.

1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".

2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".

3. Now select "Save & Exit" and press "yes".

4. Once you have done this, hold down the "power" button until the laptop turns off completely.

5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".

6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".

7. Choose "System Restore" and select a date prior to when the problem started.

The computer should now go through the restore process and then start normally for you.