Question Advice on fans - - - they're all running but no RGB ?

[SPECOPS70]

Hello all.

I just finished building a rig. It POSTed and is running great. BUT.

I bought antec 4 pin 120mm rgb f12 series fans. I installed 10 of them. some intake and some exhaust.

All fans are running but no RGB.

Connected all the fans to the provided splitters. then I connected them to the commander xt.

The fans also cam with 4 pin daisy chain cables. Connected all fans via 4 pin then the final 4 pin into the msi jrgb 4 pin.

No RGB.

I downloaded ICUE and MSI center and still nothing. Any advice would be great.

MSI pro b650-p wifi
7800x3d
7800xt
850 psu
32gb ddr5

https://www.amazon.com/Antec-120mm-Case-Packs-4-PIN/dp/B08JPYK876/ref=sr_1_3?crid=5TR1JFLL66UK&dib=eyJ2IjoiMSJ9.wff5s8wOaNsnn9DWUFWqf9iiKpDw6qZupElNfvamk1oz4z_zgcNMyilWWYQ7c845W3KzBpCuAuWAGFCrJRiiAUlzbLKj9FxDsKxlA2CdTOuNi7vpzQR3Ph3NrcPKrA73qNZ7wPddX-AQLdEt8EKeRBvN1dPXfDn8kJXTIzvC-7-IVERb4YEtE8GX7wc6Jn-kjGsZoSphignrT4JzCQnfjwnOh9rjQw99nyd2Wr43IpE.bLiJ-9Z0fWVeCIVyqiXc1bMzcZ9Xp3SIQFAm0c0p0h0&dib_tag=se&keywords=antec+case+fans+rgb&qid=1710122127&sprefix=antec+case+fans+rgb,aps,121&sr=8-3&th=1

Probably something simple that I am missing.

Thx

 

[Lutfij]

Connected all the fans to the provided splitters. then I connected them to the commander xt.
Why are you using commander XT when the fans should be coming with a hub of it's own...?
https://www.antec.com/documents/product/cooling-230728_Antec_F12_Racing_ARGB_Manual-OL.pdf

 

[JohnBonhamsGhost]

The fans also cam with 4 pin daisy chain cables. Connected all fans via 4 pin then the final 4 pin into the msi jrgb 4 pin...No RGB

these are aRGB fans.
that requires a 3pin LED connection to the motherboard.

 

[SPECOPS70]

No hub.

 

[SPECOPS70]

Pretty sure they are RGB not aRGB.

 

[JohnBonhamsGhost]

No hub.

Pretty sure they are RGB not aRGB.

i believe @Lutfij just has the wrong version of these fans linked in their reply.
i doubt Antec even has a support page for the old RGB versions.

i would try each of these fans separately on each 4pin RGB board header.
if one of their LED sets doesn't work it could affect all of those on the daisy chain.
or if one of the headers doesn't seem to function, it would be a problem with the board itself.