Question Aerocool rev pro rgb

[chriskapelis]

So i got scammed and instead of a 3-set rgb with a hub , i only got one , with no hub. I got it in my case and putted the 12v rgb into my mobo rgb header , is there any way i can change the colour?

 

[Lutfij]

Make and model of your motherboard? https://www.aerocool.com.tw/images/fan/rev/rev-rgb-pro/rev-rgb-pro-manual.pdfPer the manual[/url yuo should be able to connect the fan to the board as a regular RGB component and as a PWM fan as well. Might want to double check with us before connecting by shooting us a picture of the fan's connectors and the connectors on your board.

The arrow on the RGB end of the fan should correlate to the 12v pin on the RGB header on your motherboard.

 

[chriskapelis]

My motherboard is the Asrock b450m-pro4 , this is how i connected it https://imgur.com/a/PZgcvVf . The rgb header in this case is suppose to go into the hub ,which i dont have since i only got 1 fan. So i just connected it directly to the motherboard...at the moment the fan is working fine and is having a red breathing effect . Is there any way i can change the effect or the colour without the hub?