[SOLVED] After enable xmp profile for 3200MHz my pc won't boot

Jun 1, 2020
2
0
10
Cpu: amd ryzen 5 2600
Ram: Trident Z rgb 3200MHz
Gpu: r7 360 amd
Motherboard: b450m mortar max

I tried manual oc using dram calculator
Xmp profile enabling method
Update bios to the latest one
After every try to get 3200mhz speed my pc won't boot so i have to reset my bios then again try and try

What is the solution for this issue?
 
Solution
That's Dimm2, which with msi is still A2. It's only Asus who has done some funky reconfigure on slots, but for Ryzen it's A2 regardless of actual slot.
Cpu: amd ryzen 5 2600
Ram: Trident Z rgb 3200MHz
Gpu: r7 360 amd
Motherboard: b450m mortar max

I tried manual oc using dram calculator
Xmp profile enabling method
Update bios to the latest one
After every try to get 3200mhz speed my pc won't boot so i have to reset my bios then again try and try

What is the solution for this issue?
Do you have RAM in right slot(s), Usually in A2 and B2, look it up in the manual.
 

WildCard999

Titan
Moderator
Yes
I'm using in B2 slot but it's not working :(
Just 1 stick? If so then it needs to go into the A2* slot.

From the manual...
I32bdOk.png
 
Last edited:

Karadjgne

Titan
Ambassador
Lol, no worries, I had to go back and look it up. Mobo's have used the same layout for years and then asus decided to swap it up, that'd be B2 on some of those boards, A2 being the farthest from the cpu. Not a bad idea with cpu cooler overhangs and taller heatsinks, but you'd think such a simple thing would have been done years ago.
 
  • Like
Reactions: WildCard999