Aftermarket cooler for Radeon 6950

Status
Not open for further replies.

phoshov

Distinguished
Jul 23, 2011
2
0
18,510
Hello all,

I currently have a Sapphire 6950 2gb and I was wondering if someone has some recommendations on an after market cooler for it. I flashed it to a 6970. I was also wondering if installation was easy and simple.

Please bear with me as this was my first PC build and any help is appreciated.

Thanks
 
Solution
Most if not all after market coolers will fit reference PCBs, with that in mind it should be easy(Think CPU Heat Sink Fan) to replace the sock cooler. They should come with a VRM sink and memory sinks, which stick in place with preapplied thermal tape or pad. Just make sure you clean ram chips and vrms with Denatured Alcohol to avoid them not sticking properly and falling off!
I like this one, it will take up 3 slots and cost you about $70 but run cool and quiet.
http://www.arctic.ac/en/p/cooling/vga/376/accelero-xtreme-plus-ii.html?c=2182

jeepster50

Distinguished
Mar 27, 2011
173
0
18,710
Most if not all after market coolers will fit reference PCBs, with that in mind it should be easy(Think CPU Heat Sink Fan) to replace the sock cooler. They should come with a VRM sink and memory sinks, which stick in place with preapplied thermal tape or pad. Just make sure you clean ram chips and vrms with Denatured Alcohol to avoid them not sticking properly and falling off!
I like this one, it will take up 3 slots and cost you about $70 but run cool and quiet.
http://www.arctic.ac/en/p/cooling/vga/376/accelero-xtreme-plus-ii.html?c=2182
 
Solution
Status
Not open for further replies.