AHCI issues on SATA 1-4

Hostage_3

Honorable
Feb 24, 2012
14
0
10,510
0
Hi, I'm trying to enable AHCI on my SSD witch in connected to SATA port 1 on my MB. I first changed the registry entry, using a tut i found on MS web page. I then re-booted, entered bios and changed SATA ports 1-4 to AHCI mode. Saved and exited.
The system booted just fine, and i noticed a slight speed boost on my ssd. It also installed MS AHCI drivers.

I left my system on over night, and when i woke up this morning, a message saying: No boot device detected, insert a boot device and restart computer.

I changed back to IDE mode, and the system boots fine.
I then changed in back to AHCI, but when i restart, SATA ports 1-4 is not detected in the BIOS. And system will not boot, displaying the same message as above.

Does anyone know whats wrong?

My rig:
ASUS M4A89TD PRO/USB 3
AMD 1055T @ 3,6Ghz
AMD 6970
Corsair F60a SSD
 

Similar threads


ASK THE COMMUNITY

TRENDING THREADS

Latest posts