AIW 9600 - Catalyist success(?) at Last

  • Thread starter Thread starter Guest
  • Start date Start date
  • Tags Tags
    GPUs
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

I upgraded my system to an Audigy2 ZS andAIW 9600 (not Pro).
The Catalyist software refused to install because parts
of older versions were still present despite my efforts to
remove them.


The old XP was taking a long time to load. Time for reformat.
I freed up a spare drive and installed XP Pro from scratch.
Actually a number of installs as it took a while to get
Fedora Core 2 and XP to coexist.

The result - the AIW 9600 is alive and well. Media Center
makes capture files that Nerovision almost always accepts.
The one exception would burn only if I didn't insert chapters.

It appears my previous problems with getting newer versions of
ATI software to work properly are caused by defects in the upgrading
procedures and software. The ATI cat-uninstaller doesn't.

--
Chuck Forsberg caf@omen.com www.omen.com 503-614-0430
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 FAX 629-0665
 
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

On Sat, 03 Jul 2004 14:22:52 -0700, Chuck Forsberg WA7KGX wrote:

> I upgraded my system to an Audigy2 ZS andAIW 9600 (not Pro). The Catalyist
> software refused to install because parts of older versions were still
> present despite my efforts to remove them.
>
>
> The old XP was taking a long time to load. Time for reformat. I freed up
> a spare drive and installed XP Pro from scratch. Actually a number of
> installs as it took a while to get Fedora Core 2 and XP to coexist.
>
> The result - the AIW 9600 is alive and well. Media Center makes capture
> files that Nerovision almost always accepts. The one exception would burn
> only if I didn't insert chapters.
>
> It appears my previous problems with getting newer versions of ATI
> software to work properly are caused by defects in the upgrading
> procedures and software. The ATI cat-uninstaller doesn't.

Perhaps I spoke a bit too soon. Some captured files cause NeroVision to
flip out if I insert chapters on the way to burning a DVD.

I tried the 4.6 Catalyist but I get the black screen of death about
the same as when I tried 4.6 with my AIW 7500.

--
Chuck Forsberg caf@omen.com www.omen.com 503-614-0430
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 FAX 629-0665