Archived from groups: alt.comp.periphs.videocards.ati (
More info?)
that would be my guess also check the wire to make shure its all the way in.
on both the tv card and on the sound card. you shuld feel 2 clicks while its
going in.
also test the speaker to make shur its not the problem you may have banged
some wires around while installing the tv card/aiw. i did this a while back
when i fineshed putting a new tv card in it worked fine till i slide the
computer back under the desk and it was pulling the speaker wire to the side
and lost right channel till i slid it back out. and saw the wire tangeled up
and getting puled.
--
-------------------------------------------------------------------------
FIGHT BACK AGAINST SPAM!
Download Spam Inspector, the Award Winning Anti-Spam Filter
http://mail.giantcompany.com
"R. J. Salvi" <rjsalvi@nospamambianceacoustics.com> wrote in message
news:ZANAc.6417$fd.1003@twister.socal.rr.com...
> Under the assumption that your sound works fine on other program material,
> check your TV card to sound card connection. It sounds like the wire is
not
> plugged in all the way on one end or the other.
>
> --
> Robert J. Salvi, Ambiance Acoustics
>
http://www.ambianceacoustics.com
> San Diego, CA USA
> (858) 485-7514
>
> "mortimer" <mortimer2000del@hotmail.com> wrote in message
> news
h47d09b6reg7hajc5pa0l9aq6t58dtf15@4ax.com...
> > Just picked up an AIW9700 pro and am having a problem getting tv
> > output in stereo. I've got the output from the card connected to the
> > line-in on a SBlive card. When I select tv channels they indicate that
> > they are in stereo but I am only getting sound out the left speaker. I
> > have searched everywhere for a setting that may be misconfigured but
> > no luck. Suggestions?
> >
> > Thanks
>
>