Im upgrading my pc to a much more power demanding spec and Im worried that my Allied 400watt PSU may not be up to the challenge.
The unit is over 1 year old but has ran my 2.0Ghz XP2400+ and my Gf4 Ti4200 on a Soyo KT400 Ultra with no problems what so ever, But what im upgrading to might be too much for the old dog and i need to know if i should upgrade it also. This is the upgrade im going for...
Gigabyte K8N SLI 939 Motherboard
AMD Athlon 64 3200+ (Venice)
XFX Geforce 6600 GT 128mb PCIxE SLI (just one at this point)
Hitachi Deskstar K780 80Gb SATA II 3.0Gb/s
1 Gig of DDR400 (Rosewill brand - yes i know its cheap but it will work for now)
Ive read that this type of system spec needs at the least a 400 watt PSU and thats what i have but the brand is what im not sure of... is it atleast a decent brand? Also I would assume that the PCIxE bus uses alot more power than the AGPx8 i have now.... while hte CPU runs at the same clock speed as my 2400 i know of its blistering fast FSB and that too concerns me. Imput would be welcome, I also need to know if there are any possible damage concerns that can result from stressing a PSU passed its usable limits. I dont want to spend all this money on new parts only to have them burn up in a blaze of glory.
Heres the link the the PSU, Allied is an APEX side-brand i assume ...
http://www.apextechusa.com/proddetail_power.asp?id=18
The unit is over 1 year old but has ran my 2.0Ghz XP2400+ and my Gf4 Ti4200 on a Soyo KT400 Ultra with no problems what so ever, But what im upgrading to might be too much for the old dog and i need to know if i should upgrade it also. This is the upgrade im going for...
Gigabyte K8N SLI 939 Motherboard
AMD Athlon 64 3200+ (Venice)
XFX Geforce 6600 GT 128mb PCIxE SLI (just one at this point)
Hitachi Deskstar K780 80Gb SATA II 3.0Gb/s
1 Gig of DDR400 (Rosewill brand - yes i know its cheap but it will work for now)
Ive read that this type of system spec needs at the least a 400 watt PSU and thats what i have but the brand is what im not sure of... is it atleast a decent brand? Also I would assume that the PCIxE bus uses alot more power than the AGPx8 i have now.... while hte CPU runs at the same clock speed as my 2400 i know of its blistering fast FSB and that too concerns me. Imput would be welcome, I also need to know if there are any possible damage concerns that can result from stressing a PSU passed its usable limits. I dont want to spend all this money on new parts only to have them burn up in a blaze of glory.
Heres the link the the PSU, Allied is an APEX side-brand i assume ...
http://www.apextechusa.com/proddetail_power.asp?id=18