Alphacool NexXxoS XT45 Full Copper 60mm Dual Radiator

[Jet3030]

Hello everyone. I'm wondering what the cooling capacity is for this double 60mm radiator. Would it be able to handle 125W? No overclocking will be involved. Here is the rad.

https://modmymods.com/alphacool-nexxxos-xt45-full-copper-60mm-dual-radiator-14223.html

After doing more research, I think I might need to squeeze in a single 60mm rad also. If anyone has experience water cooling an htpc, I could use some advice. Thanks in advance.

 

[rubix_1011]

Are you meaning it is 60mm thick? And dual.....120mm? Dual 140mm?

Based on any combination of the above, you only need one.

 

[Jet3030]

Are you meaning it is 60mm thick? And dual.....120mm? Dual 140mm?

Based on any combination of the above, you only need one.

No, it's actually a dual 60mm. Meaning it uses 60mm fans. I put together a water loop with a cheap ($15) single 80mm rad from Amazon to test if it could cool a 95W Q9400. It did really well, idled at 38C and topped out at 54C under load. Now I really think that double 60 can handle 125W. I would have to swap my Q9400 for a C2Q 65W "S" version because I want to do the 60W 750ti also. It's just for fun, trying to water cool my htpc. Thanks for responding. If you want to keep it open, I'll be testing that double 60mm in about a week.

 

[rubix_1011]

That's a tiny little rad. Long, long ago, I actually had a Swiftech kit with two 80mm rads...still have them.