[SOLVED] Am I doing something wrong with my new build

[Frontalarrow70]

It’s my first Pc build and I’m running to an issue...so I have everything in the necessary places the need to plug into and the cpu is in the socket properly( no pressure applied just fell right in)...gpu is in and everything but when I power it up...no display what so ever and i get one long beep and 2 short beeps. I don’t know whats going on, any help?
My build:
CPU - ryzen 5 3600
GPU - sapphire rx 470 4gb nitro
Mobo - MSI mpg x570 gaming plus
M.2 - SP 2280 256gb
Ram - Xpg z1 2x8gb 3200mhz

 

[Mooons]

See this post:

https://forums.tomshardware.com/threads/one-long-beep-2-short-beeps-repeat.2708175/

Try moving around your RAM.

 

[Frontalarrow70]

See this post:

https://forums.tomshardware.com/threads/one-long-beep-2-short-beeps-repeat.2708175/

Try moving around your RAM.

Thanks I tried that but still the same

 

[Mooons]

Is the GPU new?

 

[Frontalarrow70]

Is the GPU new?

Nah bought it from someone

 

[Mooons]

Did you just try only booting with one stick?

Try plugging in your monitor to the motherboard HDMI and see if you get a signal.

 

[Frontalarrow70]

Did you just try only booting with one stick?

Try plugging in your monitor to the motherboard HDMI and see if you get a signal.

Yup I tried booting with one stick no luck there and I’m using my TV as a display for now plugged it up n still nothing

 

[Mooons]

Can't be your video card then.

Are you sure your CPU is correctly installed? You matched up the triangles on the CPU and the MB? Pull the CPU out and make sure there are no pins bent. Also make sure you do not have any standoffs underneath your MB that is causing issues.