Question Am I overthinking this?

[Fowlplay]

Hi all. I recently finished my new machine. Tomahawk B550 Max Wi-Fi with a EVGA CLC 280. I want to get away from the EVGA flow control software. I have it plugged into the mobo pump header and the fans connect to a splitter that comes off the same harness so it all runs off one header. I have plenty of fan headers to hook them to separately (the radiator fans) so I could go that route. Would it be a bad idea to run just the fans into a splitter and then plug them both into the cpu header? That way I’d only need two bios settings one for the pump and one for both of the fans. Sorry if this is a lame idea, it’s my first go around with a AIO.

 

[Crosslhs82x2]

Oops sorry about that. (Like)

Sounds like it should work, make sure to set those headers to Pwm.

Then you will want to find a fan curve that works the way you want.
My thought is pump speed 100%
Fans to what you feel noise wise vs the cooling you need for what you do on you pc.

I personally haven't done anything with an Evga.
Mine have always been Corsair.
Good Luck!!!!

 

[Fowlplay]

Thanks for the reply, I appreciate it.