AMD A10-5800K OC Using AMD Overdrive

[Kim Kelvin]

looking for a safe AMD Overdrive settings for my build..
Currently Turned on my Mobo's OC Genie.
Results 3.8Ghz -> 4.09Ghz

Now I'm looking for more but safe settings for Overclocking my CPU and GPU. (APU)

Anyone can give some ? Thanks

-------------------
Specs :
MSI FM2-A85XA-G65
AMD A10-5800K 3.8GHz
2x4 8 GB G.Skill Ares 1866 RAM
Cooler Master Seidon 120M
Thermaltake Smart SE 730W 87% Modular PSU
NZXT Lexa S Casing
1 TB Western Digital Caviar Blue HDD
--------------------

PS : im new to overclocking

 

[siddharthmukul007]

4.4 - 4.5ghz will be a sweet spot for you.

i recommend you do it via bios and run prime95 for 5-6 hrs after you oc....as a stability test

 

[Kim Kelvin]

4.4 - 4.5ghz will be a sweet spot for you.

i recommend you do it via bios and run prime95 for 5-6 hrs after you oc....as a stability test

any settings that i can copy sir ? im really knew to overclocking. thanks

 

[siddharthmukul007]

please don't call me sir....to get to 4.4 all you need to do is set the multiplier to 44.

if you find an error bump up the cpu voltage.

that's all

 

[Kim Kelvin]

please don't call me sir....to get to 4.4 all you need to do is set the multiplier to 44.

if you find an error bump up the cpu voltage.

that's all

Thank you "sir" haha ill try it later

 

[siddharthmukul007]

good luck and cheers

N.B. : remember (increase the cpu voltage only in very very small bumps and only if necessary....never cross 1.4v)

 

[Kim Kelvin]

good luck and cheers

N.B. : remember (increase the cpu voltage only in very very small bumps and only if necessary....never cross 1.4v)

When i try launching Prime95 after a few seconds my system restarted . 🙁
Checked the bios
CPU Voltage is Auto
CPU-NB Voltage is Auto

if i were to change this to manual what would be the settings ?

 

[siddharthmukul007]

what cpu frequency are you aiming for??????

 

[Kim Kelvin]

what cpu frequency are you aiming for??????

Trying to get 4.2Ghz

 

[siddharthmukul007]

set cpu voltage at 1.33v...keep CPU-NB Voltage (Auto)

 

[Kim Kelvin]

set cpu voltage at 1.33v...keep CPU-NB Voltage (Auto)

Ok sir ill test it. Thanks

 

[Kim Kelvin]

set cpu voltage at 1.33v...keep CPU-NB Voltage (Auto)

I'm running Stress test now sir .
is this alright ?

 

[Kim Kelvin]

Currently running @ 4.2 ghz ( 1.33750 V )
Currently running Prime95 ( 1 hour + now)
thank you so much for the help sir

still waiting for Prime95 stress test to reach 4~5hours

 

[siddharthmukul007]

good you got that now....keep and eye on temps and report back if you have an error

 

[Kim Kelvin]

good you got that now....keep and eye on temps and report back if you have an error

Thank you so much sir
Currently i dont have any problems @ 4.2GHz OC and my CPU temp is only 37°C , is it alright >

 

[siddharthmukul007]

perfectly alright

 

[Kim Kelvin]

perfectly alright

Thanks you "sir" haha
based on the temp i have right now, can i still raise it ? up to what frequency ? hehe

 

[siddharthmukul007]

you can try going up to 4.4ghz, might require a little more voltage (good idea to try with the current voltage first)

 

[Kim Kelvin]

you can try going up to 4.4ghz, might require a little more voltage (good idea to try with the current voltage first)

Ok sir thanks