amd a10-6800k problem

[vampyiere6]

Hello!

So i just puted together a pc and is using a amd apu a10-6800k black edition.

I installed windows and all drivers etc and then rebooted now it says that the grapics drivers have reset all the time (went back to normal or something like that)
And it freezes the display i installed the newest catalyst it jusst keeps telling me it has reset so i am not able to do anything what would i have done wrong or not installed?

I have never used an apu before just fx- and intel with a real gpu and never had any problems.

Kingstone fury 8gb 2x4gb 1866mhz ram
silverstone 500w psu
120gb kingstone v300 ssd
Gigabyte fm2 a88x or something mobo does not remember exact model
Amd a10-6800k black cpu

 

[swifty_morgan]

after the build you installed drivers off the disc. you theN went to windows updates and got everything/rebooted and went back/and back again???

and you set the apu up in the BIOS/added ram to 2gigs??

ssd is set up and newest firmware installed?

 

[vampyiere6]

after the build you installed drivers off the disc. you theN went to windows updates and got everything/rebooted and went back/and back again???

and you set the apu up in the BIOS/added ram to 2gigs??

ssd is set up and newest firmware installed?

i did not went back the catalyst/windows gpu driver or what it is went back to facory settings (reset) and it just keeps doing that every 5 seconds so cant do anything.

I only installed the lan drivers from the cd that came with the mb all the other i downloaded the latest drivers from the internet from their own sites.

all the windows updates i have not yet taken because after i installed all the drivers and it wanted to reboot it just keeps resetting the gpu driver i think its the catalyst or then its windows itself but it just keeps resetting and going back to factory it says and the screens goes black for a second or 2 when it says it restores to facotory settings.

 

[swifty_morgan]

congratulations. maybe try a reinstall ( reformat ). DO install the drivers off the disc........... then go to windows updates/reboot/go to windows updates/reboot/go to windows updates/reboot............. don't go to any sites for software.................... you just could have screwed yourself.

 

[vampyiere6]

congratulations. maybe try a reinstall ( reformat ). DO install the drivers off the disc........... then go to windows updates/reboot/go to windows updates/reboot/go to windows updates/reboot............. don't go to any sites for software.................... you just could have screwed yourself.

how the hell could i have screwed myself when i take from the manufactures own sites and takes the latest software that is for the components?

reinstalled windows and installed all the drivers etc of disc, and did all windows update etc and rebooted exact same problem. the amd display driver have stopped responding and went back to normal message and keeps doing that until bsod.

So reinstalled windows again and did not installed catalyst at all and everything works fine but i need the catalyst for the apu to run the graphics but when i install it and reboot it just keeps crashing and freezes the comp.

So dont give suggestions when you dont know anything you think i just googled drivers and took from all random sites i found?

 

[swifty_morgan]

you may have installed a bad or corrupt motherboard driver..??

take a look in the booklet and check you BIOS graphics settings.

did you try a cmos reset?

if you put the machine together and you didn't install the graphics drivers but instead went to windows updates after lan install........... how does the machine run?

what app needs the CCC?

 

[bmacsys]

go into your control panel and uninstall all the third party drivers and re-install them one at a time. I have that board and APU combo and it works great.

 

[bmacsys]

Double post. Deleted.