amd fx 6300 on 760g overclock

[Sameer25]

hi i have a msi 760gma p34 fx mother board and wanted to overclock but after seeing that the vrm could probably not handle but then i saw this review and got hope back

now i put a fan on the vrms to cool them and this is after stress testing them for 1-2hrs (i am guesing tmpin 2 is the vrm)

is that enough overhead for overclocking the cpu because the vrms dont go above 68C and they should be less than 90. i am overclocking on stock cooler and i will take it slowly like monitering a 100mhz at a time and checking for more headroom. can i break it if i do that

 

[clutchc]

It's really hard to say what temps are which in 3rd party apps like that. But they both look fine. Of course, if you aren't OC'ing, you'd expect them to be fine.
Btw, you can buy add-on heat sinks for the vrms that come with thermal adhesive to attach them to the MOSFETs. Ex: http://www.amazon.com/Enzotech-MOS-C10-Forged-Copper-Heatsinks/dp/B004CL89D8

 

[Sameer25]

It's really hard to say what temps are which in 3rd party apps like that. But they both look fine. Of course, if you aren't OC'ing, you'd expect them to be fine.
Btw, you can buy add-on heat sinks for the vrms that come with thermal adhesive to attach them to the MOSFETs. Ex: http://www.amazon.com/Enzotech-MOS-C10-Forged-Copper-Heatsinks/dp/B004CL89D8

I am using hwmoniter and I already put a fan on them which is cool enough