amd overclock HELP

[skippy19982]

i have a amd FX6300 im at 3.7 ghz i want to overclock with the h60 how high could i go before going over 60c. and what should my cpu voltage be
Im new to the forum ^-^

 

[Stjohn Russell]

You should use AMD over drive to over clock and use the core multiplication (Easiest Way to over clock) On my old FX6100 Standard clock is 3.3Ghz but i clock to 4.4GHz with a cooler master 212 (Which is just two fans an a heat sink) With water cooling im sure you will be able to reach 4.4 Ghz Plus.

http://sites.amd.com/us/game/downloads/amd-overdrive/Pages/overview.aspx

 

[skippy19982]

what should my voltage be for 4.5 ghz

 

[Stjohn Russell]

what should my voltage be for 4.5 ghz

Dont worry about voltage just use clock multiplication

 

[Stjohn Russell]

Try the Auto Clock feature it will Clock for you and change Voltage accordingly.

 

[skippy19982]

do you think i will be able to run bf4 on ultra with fx6300 4.5ghz and r9 280x

 

[Stjohn Russell]

do you think i will be able to run bf4 on ultra with fx6300 4.5ghz and r9 280x

I can run BF4 on ultra with my CPU @ 3.3Ghz and my GTX 560 im sure you will be able to.

 

[skippy19982]

do u still ill get 60 fps and were is the auto clock feature

 

[Stjohn Russell]

do u still ill get 60 fps and were is the auto clock feature

Yes I do I Can even record at 60 fps

 

[skippy19982]

Thanks man you were a huge help

 

[Stjohn Russell]

Thanks man you were a huge help

Any-time man if you need more help or don't understand just let me know and i will try and help

 

[skippy19982]

how do i use this it says auto clock failed at 3.8 ghz

 

[skippy19982]

how do i use this it says auto clock failed at 3.8 ghz

 

[Stjohn Russell]

Ok now try clock multiplication Under Clock/Voltage. Disable turbo core and then move the sliders until you reach the clock speed you want

 

[skippy19982]

it keeps crashing. couldn't i set my voltage to 1.446 in bios and turn multiplier up in bios and be fine ??? worst case i reset my cmos i have a msi board

 

[skippy19982]

its the msi 970a-g43

 

[Stjohn Russell]

it keeps crashing. couldn't i set my voltage to 1.446 in bios and turn multiplier up in bios and be fine ??? worst case i reset my cmos i have a msi board

Ya give it a try don't mess with the voltage just use clock multiplication

 

[skippy19982]

why not because if i peak over 4.0 ghz it crashes so i have to raise voltage

 

[Stjohn Russell]

why not because if i peak over 4.0 ghz it crashes so i have to raise voltage

Ok so yours maxes out a 4Ghz well then raise the voltage and keep trying what speed are you aiming for?

 

[Stjohn Russell]

With my CPU @ 3.9Ghz (Turbo Core enabled) its about 1.4125 v