Amplifier watts information

[usman115236]

I buy 1000 watt woofer and 2 speaters. 1200 watt amplifier Is best or not for woofer and speaker

 

[mymutter]

You need to find a 3 channel or 4 channel amplifier. (a 4 channel would be easier to find)

you do not need to run the full watt rating to any speaker, so I would recommend something along the lines of 100-200 x 4 for the amplifier. a 100 x 4 channel amplifier will provide 100 watts to each speaker, and 200 (or 400) watts to your woofer.
while hopefully not straining the electrical system of your car.

Without knowing the brand and model #'s of the woofer or speakers it is very difficult to recommend an amplifier that will work for you. Posting those up, and a $ budget will be very helpful.

 

[usman115236]

Speaker sony xs-fb693e
Web:https://www.sony.com/pk/electronics/car-speakers/xs-fb693e
Woofer kenwood KFC-W3010
Web:http://www.kenwood-electronics.co.uk/car/amp_spk/com/KFC-W3010/?view=details


I give you information about speakers and woofer
NOW GUIDE ME

 

[Rogue Leader]

Speaker sony xs-fb693e
Web:https://www.sony.com/pk/electronics/car-speakers/xs-fb693e
Woofer kenwood KFC-W3010
Web:http://www.kenwood-electronics.co.uk/car/amp_spk/com/KFC-W3010/?view=details


I give you information about speakers and woofer
NOW GUIDE ME

Just a tip, demanding help here is not a way to win friends, nor is posting the same message 8 times, and hitting the alert button with your answer copied in as if it would help get you an answer faster. And DO NOT use the alert button unless its for major forum administration issues (ie fights, profanity, porn, threats, violence, etc)

This is a volunteer forum of people helping you out of the goodness of their heart in their free time. mymutter will answer you, respect his time and effort.

 

[jimboraver77]

MERGED QUESTION
Question from usman115236 : "Amplifier power information"

I want to connect 1 woofer(peak power 1000watt) and 2 speakers (peak power 450watt

Guide me how mach watt power amplifier I buy?

[SPEAKER AND WOOFER INFORMATION ]
Speaker sony xs-fb693e
Web:https://www.sony.com/pk/electronics/car-speakers/xs-fb693e
Woofer kenwood KFC-W3010
Web:http://www.kenwood-electronics.co.uk/car/amp_spk/com/KFC-W3010/?view=details



NOW GUIDE ME

How loud does it have to be? A 75W for the Sony plus a 400W for the sub would be fine. They make amps that are specifically 3 channel configs similar to that.

try to look at RMS wattage rather than peak power, a quick search shows that sub to be rated at 200w RMS so ideally a 200w RMS amp would be perfect. as kanewolf said above a 75w amp for the sony's would be fine. Just remember to check that its RMS rating and not peak power.

 

[Rogue Leader]

usman115236 - this is your final warning. Stop spamming the forum with your question. Wait patiently for an answer. Do not keep quote replying blank posts or posting new threads. And do not demand that people help you. I have deselected the solution you picked because clearly your problem is not solved and you want a new answer. Picking a solution basically ends your thread, so do not click the "Pick as Solution" button, until you are done and have your answer.

If you do any of these things again you will be taking a break.

 

[mymutter]

Kenwood KAC-8406
It fits in the same quality range if your gear. 70 watts for the front speakers and 200 x 1 @ 4 ohms for your sub. I would recommend a basic sealed box for the sub.

The amplifier has high and low pass filters, which will help you tune the amplifier to suit your set up. Are you getting this professionally installed?

Good luck!