Antec three hundred two computer case

[Franicelcha]

Hi

I was planning to buy the Antec three hundred two computer case for my first build.

However, I have noticed that Newegg.ca and the manual of the case are not showing the same depth and height.

One of them shows depth of 20.2 inches and height of 18.5 inches. The other source shows a depth of 18.5 inches and height of 20.2 inches.

Could anyone who is actually using this case himself / herself tell me which are the correct dimensions. I would like to know before I buy because I am restricted in my space.


Thank you

 

[skit75]

The height is 20.2 and the depth is 18.5. I have the Antec 902 =)

Source: http://store.antec.com/gaming-series/three-hundred-two.html

 

[thblite]

i have the antec 302 and the depth is 20.2" and the height is 18.5".

 

[skit75]

i have the antec 302 and the depth is 20.2" and the height is 18.5".

I find it hard to believe Antec's website product info would be wrong. Post a pic.

 

[Franicelcha]

i have the antec 302 and the depth is 20.2" and the height is 18.5".

I find it hard to believe Antec's website product info would be wrong. Post a pic.

As per manual
http://imgur.com/cnqQEbt

As per Newegg.ca website
http://imgur.com/BZKzLsW

 

[thblite]

i have the antec 302 and the depth is 20.2" and the height is 18.5".

I find it hard to believe Antec's website product info would be wrong. Post a pic.

i know its hard to believe thats why i was surprised. But i measured it 3 times to make sure. i can post pics tomorrow if i remember if you need.

 

[Franicelcha]

i have the antec 302 and the depth is 20.2" and the height is 18.5".

I find it hard to believe Antec's website product info would be wrong. Post a pic.

i know its hard to believe thats why i was surprised. But i measured it 3 times to make sure. i can post pics tomorrow if i remember if you need.

No need for pics. Your word is good enough for me. I'm a bit disappointed though because I would have liked the depth to be 18.5 inches and the height to be 20.2 inches.

How do you like that case ? Is it well made for a first time builder ? I was planning my first build with this case combined with a semi-modular Seasonic PSU and a full size ATX motherboard. Should I decide to cut costs and go with a Seasonic non-modular PSU ($30. less than a semi-modular PSU here in Canada at newegg.ca), do you think it could pose problems with a 520 watts PSU ?

Thank you

 

[thblite]

i have the antec 302 and the depth is 20.2" and the height is 18.5".

I find it hard to believe Antec's website product info would be wrong. Post a pic.

i know its hard to believe thats why i was surprised. But i measured it 3 times to make sure. i can post pics tomorrow if i remember if you need.

No need for pics. Your word is good enough for me. I'm a bit disappointed though because I would have liked the depth to be 18.5 inches and the height to be 20.2 inches.

How do you like that case ? Is it well made for a first time builder ? I was planning my first build with this case combined with a semi-modular Seasonic PSU and a full size ATX motherboard. Should I decide to cut costs and go with a Seasonic non-modular PSU ($30. less than a semi-modular PSU here in Canada at newegg.ca), do you think it could pose problems with a 520 watts PSU ?

Thank you

i have no issues with it. im running an hd 6950 and corsair cx 750w psu (non-modular) with a micro atx motherboard. There is plenty of room to expand and upgrade i find. I prefer modular power supplies but im not currently using one and i dont have a problem with the extra cables you can conveniently store the extra at the bottom of the hard drive cage if zip tied.

 

[Franicelcha]

i have the antec 302 and the depth is 20.2" and the height is 18.5".

I find it hard to believe Antec's website product info would be wrong. Post a pic.

i know its hard to believe thats why i was surprised. But i measured it 3 times to make sure. i can post pics tomorrow if i remember if you need.

No need for pics. Your word is good enough for me. I'm a bit disappointed though because I would have liked the depth to be 18.5 inches and the height to be 20.2 inches.

How do you like that case ? Is it well made for a first time builder ? I was planning my first build with this case combined with a semi-modular Seasonic PSU and a full size ATX motherboard. Should I decide to cut costs and go with a Seasonic non-modular PSU ($30. less than a semi-modular PSU here in Canada at newegg.ca), do you think it could pose problems with a 520 watts PSU ?

Thank you

i have no issues with it. im running an hd 6950 and corsair cx 750w psu (non-modular) with a micro atx motherboard. There is plenty of room to expand and upgrade i find. I prefer modular power supplies but im not currently using one and i dont have a problem with the extra cables you can conveniently store the extra at the bottom of the hard drive cage if zip tied.

Thanks a lot

 

[skit75]

I emailed Antec support. Maybe they will change their page.

Edit:

Hi XXXXXXXX,

Thank you for contacting Antec Inc. In regards to your inquiry, Thank you! we will address this issue and we will have it changed on our webpage.

Once again, we really appreciate your comments and suggestions.

Ticket: http://support.antec.com/support/tickets/XXXXX

Patrick Solamo
Tech Support Supervisor

 

[Franicelcha]

I emailed Antec support. Maybe they will change their page.

Edit:

Hi XXXXXXXX,

Thank you for contacting Antec Inc. In regards to your inquiry, Thank you! we will address this issue and we will have it changed on our webpage.

Once again, we really appreciate your comments and suggestions.

Ticket: http://support.antec.com/support/tickets/XXXXX

Patrick Solamo
Tech Support Supervisor

Thank you