Any case recommendations for theese parts?

[Alesartz]

My parts build:
CPU - Intel Core i7-5820k
Motherboard - ASUS X99 ROG Rampage V Extreme
Memory - G.Skill Ripjaws X Series 8GB (4 x 4GB)
Power Supply - Modular ATX Power Supply
Graphics card - Asus Geforce Strix GTX 980 4GB

 

[Alesartz]

I found this case "Corsair Carbide Series 100R Silent Edition Quiet Mid Tower Case" and it seems like a good option, doesn't it?.

 

[scout_03]

check this one for around the same price with better air flow http://www.corsair.com/en/carbide-series-spec-03-red-led-mid-tower-gaming-case

 

[neatfeatguy]

It kind of depends on what you like - picking a case is usually done by most folks based on some amount of how aesthetically pleasing it is to their eyes, along with how it functions based on reviews and recommendations.

What kind of size would you like? Given that the MB is EATX size, you don't find too many smaller cases that can house an EATX board, so anything mid tower or full tower would be your best options.

Do you like sleek looking?
Rounded edges?
Square edges?
Straight lines?
Window or windowless side panel?
A case with a color scheme to go with your other parts?

Give some kind of information about what you like/want in a tower.

Finally, give a price range as well.

Your board is an E-ATX board.
I don't think the 100r can house that.
I'd go for a Thermaltake F31

Good catch. I missed the "E" when I glanced through the specs for the MB - EATX

 

[Isokolon]

Your board is an E-ATX board.
I don't think the 100r can house that.
I'd go for a Thermaltake F31

 

[Alesartz]

It kind of depends on what you like - picking a case is usually done by most folks based on some amount of how aesthetically pleasing it is to their eyes, along with how it functions based on reviews and recommendations.

What kind of size would you like? Given that the MB is EATX size, you don't find too many smaller cases that can house an EATX board, so anything mid tower or full tower would be your best options.

Do you like sleek looking?
Rounded edges?
Square edges?
Straight lines?
Window or windowless side panel?
A case with a color scheme to go with your other parts?

Give some kind of information about what you like/want in a tower.

Finally, give a price range as well.

Your board is an E-ATX board.
I don't think the 100r can house that.
I'd go for a Thermaltake F31

Good catch. I missed the "E" when I glanced through the specs for the MB - EATX

Hi neatfeatguy and Night Owl, thanks for replying.
I really don't care that much about the case's aesthetic, I was focusing mainly on the air flow, space, etc.. so it woulden't affect the performance of the PC itself, or even boost it. The side-panel window looks good, that is my only aesthetic "goto"
My price range can variate, but around 100$ (variations are acceptable) would be perfect. Oh, and thanks for the advice on the 100R, really appreciate it.

 

[Alesartz]

check this one for around the same price with better air flow http://www.corsair.com/en/carbide-series-spec-03-red-led-mid-tower-gaming-case

Hey Scout_03, thanks for the advice, I'll put this one on the list.

 

[Alesartz]

It kind of depends on what you like - picking a case is usually done by most folks based on some amount of how aesthetically pleasing it is to their eyes, along with how it functions based on reviews and recommendations.

What kind of size would you like?]

Oh, I forgot, the size I want depends completely on if the components fit in the case. I have as much space as needed to place it, that is not a problem.

 

[neatfeatguy]

Since you have an EATX motherboard, you need something that'll allow an EATX board to fit inside and mount properly. See if this link to pcpartpicker works for you. It should hold a list of cases that support EATX boards that range from around $50 to $100. You can look through cases there and read up on reviews and such, find something that fits your needs and gets a decent review.

http://pcpartpicker.com/products/case/#f=3&sort=a8&page=1&X=5074,10132

 

[Alesartz]

Since you have an EATX motherboard, you need something that'll allow an EATX board to fit inside and mount properly. See if this link to pcpartpicker works for you. It should hold a list of cases that support EATX boards that range from around $50 to $100. You can look through cases there and read up on reviews and such, find something that fits your needs and gets a decent review.

http://pcpartpicker.com/products/case/#f=3&sort=a8&page=1&X=5074,10132

Thanks allot neatfeatguy! I´ll just look around and pick the one that fits me

 

[Alesartz]

Since you have an EATX motherboard, you need something that'll allow an EATX board to fit inside and mount properly. See if this link to pcpartpicker works for you. It should hold a list of cases that support EATX boards that range from around $50 to $100. You can look through cases there and read up on reviews and such, find something that fits your needs and gets a decent review.

http://pcpartpicker.com/products/case/#f=3&sort=a8&page=1&X=5074,10132

So, I found this case http://pcpartpicker.com/product/FbKhP6/corsair-case-cc9011081ww, and it is really convincing. I just wanted to know you guys' opinion. Thanks

 

[neatfeatguy]

So, I found this case, and it is really convincing. I just wanted to know you guys' opinion. Thanks

You didn't link any case in your last post, which one are you looking at?

 

[scout_03]

you need to get a full tower case to hold that eatx mothergboard some of them here https://www.newegg.com/Product/ProductList.aspx?Description=eatx%20case&Submit=ENE&IsNodeId=1&N=100007583%20601292092 and more here http://www.ncix.com/category/computer-cases-e-atx-93-104-88.htm

 

[Isokolon]

you need to get a full tower case to hold that eatx mothergboard some of them here https://www.newegg.com/Product/ProductList.aspx?Description=eatx%20case&Submit=ENE&IsNodeId=1&N=100007583%20601292092 and more here http://www.ncix.com/category/computer-cases-e-atx-93-104-88.htm

there are actually a number of mid tower cases that can hold an E-ATX board
like the Phanteks Eclipse P400(s), the Phanteks Enthoo Pro M, the Thermaltake F51, In Win 303 or the Corsair 400C

 

[Alesartz]

So, I found this case, and it is really convincing. I just wanted to know you guys' opinion. Thanks

You didn't link any case in your last post, which one are you looking at?

Omg, that was dumb of me. Sorry. I´ll update the post.

 

[Alesartz]

you need to get a full tower case to hold that eatx mothergboard some of them here https://www.newegg.com/Product/ProductList.aspx?Description=eatx%20case&Submit=ENE&IsNodeId=1&N=100007583%20601292092 and more here http://www.ncix.com/category/computer-cases-e-atx-93-104-88.htm

In the the product's specs it says that it supports EATX motherboards, although being only a mid-tower case.
(http://pcpartpicker.com/product/FbKhP6/corsair-case-cc9011081ww)

 

[Alesartz]

you need to get a full tower case to hold that eatx mothergboard some of them here https://www.newegg.com/Product/ProductList.aspx?Description=eatx%20case&Submit=ENE&IsNodeId=1&N=100007583%20601292092 and more here http://www.ncix.com/category/computer-cases-e-atx-93-104-88.htm

there are actually a number of mid tower cases that can hold an E-ATX board
like the Phanteks Eclipse P400(s), the Phanteks Enthoo Pro M, the Thermaltake F51, In Win 303 or the Corsair 400C

Yep, the Corsair 400C was my choice. Thanks for the info anyways