Any cases that fit these measurements?

kennethk

Honorable
Sep 7, 2013
17
0
10,510
Was wondering if anyone could suggest a case that has these measurements

1ft5 inchs in depth and 2f3 inches in height, length doesn't really matter, the height doesn't haven't to be that big but close to it.
 
Solution
Is this for an ATX motherboard (current default size)?

You can go to NCIX or Newegg and easily look at cases to see their dimensions.

I see a big problem right off. Any case that TALL is also going to be fairly deep. Example:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811146089

9.25" x 23.43" x 23.03" (W x H x D)

If you want 17" you'll have to look at the ATX Mid-Towers such as:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129042

18.30" x 8.10" x 18.00"

I'm guessing this is for a desk?
Usually the rubber pads on the bottom of the case don't extend to the front, so at 18.3" it might stick out a bit but otherwise fit fine.
Is this for an ATX motherboard (current default size)?

You can go to NCIX or Newegg and easily look at cases to see their dimensions.

I see a big problem right off. Any case that TALL is also going to be fairly deep. Example:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811146089

9.25" x 23.43" x 23.03" (W x H x D)

If you want 17" you'll have to look at the ATX Mid-Towers such as:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129042

18.30" x 8.10" x 18.00"

I'm guessing this is for a desk?
Usually the rubber pads on the bottom of the case don't extend to the front, so at 18.3" it might stick out a bit but otherwise fit fine.
 
Solution
Thats correct, a full size atx board will be going in it, I'm trying to keep the price tag under $100s but that's doubtful. I'm more concerned about depth rather than height.

Case wise I'm looking for something that's all painted black, and ports on the top. I'm pretty picky when it comes to design 😛

I do like the Bitfenix Survivor Case though I'm trying to fit a 7950 gigabyte gpu into it which is around 11 inches I think.

Thanks though.