Question Any hope for my 3060 Ti ?

[Mach 1 Padilla]

I have a evga 3060ti xc that loses display and/or artifacts when the nvidia drivers are installed. Works fine with the windows basic drivers but of course cant just use those. Ive tried it in 3 different PCs while my other 3060 works fine in them. Is there anything i can try to do to fix it? As soon as the drivers load the screen goes blank, still has signal. After a restart the bios screen has artifacts and the goes blank again. Deleting the drivers makes the artifacts go away and
Screen stays on.

 

[CompuGuy71]

That is super odd.

Have you tried one of your other graphics cards in the PC you are having trouble with?

 

[Mach 1 Padilla]

That is super odd.

Have you tried one of your other graphics cards in the PC you are having trouble with?

Yes i have a evga 3060 and a rx580 that work just fine in it.

 

[Phaaze88]

Suspect defective Vram. You tried it in 3 different PCs.
RMA it.

 

[CompuGuy71]

Yes i have a evga 3060 and a rx580 that work just fine in it.

Probably time for an RMA, hopefully you've kept your receipt.

 

[Mach 1 Padilla]

Probably time for an RMA, hopefully you've kept your receipt.

RMA was denied since its a second hand card that came out of a prebuilt system.

 

[CompuGuy71]

RMA was denied since its a second hand card that came out of a prebuilt system.

Ouch, well that will happen with 2nd hand stuff. Could have been trash the moment you got it.

 

[Tac 25]

RMA was denied since its a second hand card that came out of a prebuilt system.

Try to contact the seller again. Did have any agreements that the card could be returned if it's defective?