Any suggestion on broken pin of motherboard?

[RememberThe5th]

Hello toms!
I have recived GA-EP45-UD3P as a broken, and it has only one pin broken into socket in half.
Soo far Ive tried:
Straightnen it up,
Powering without/with cpu, without it stays on (which is good sign), with it starts on/off every 2 sec,
No display,
Cpu heats up,
No burn marks.

I have 2 old mobos with me of no use, soo transplanting half of the pin to UD3P?

Or any other suggestion is also good.
I have UD3R on hands and few cpus of 775, Q6600,E5800,P4, it boot loops with every cpu but i still havent screwed it to case since I was in hurry.
Also to note, havent tried or saw which pin is nor all ram slots.

 

[Snipergod87]

You could try and find what that cpu PIN in responsible for, you simply might not be able to repair it. It is also possible that that pin hit another causing a short damaging the board elsewhere not visible.

http://eximage.ru/image.php?di=10YO

 

[RememberThe5th]

Its in bottom right side, middle of it/closer to socket, but im going to see later (after work).

 

[RememberThe5th]

It seems like its RSVD from bottom left counting 6 to left then u to 4th pin.

 

[RememberThe5th]

An Update, mobo is shorted out on VRM's somwhere....