Any Suggestion ??...

[BOSS]

HI Guys , I`m Working on my Friend`s Rig to overclocking the PC to it`s Limits , (MSI K8N Neo2 , Leadtek 6800 AGP 128mb , 1Gb KingStone Value Ram , Amd 64 Venice 3000+939, 400 Watt psu )
we do these and the system runs cool and stable :
HTT to 4 from 5 , Cpu Voltage +5.5% (about 1.55V) , Ram Voltage 2.6 , AGP Voltage 1.6 (from 1.5) and cpu at 239x9=2151 (at 240x9 system didnt boot)
is it good ? is the voltage allright ? any suggestion ?

 

[rockman_]

yea, I think that the problem is in the kingston value ram, try to configure the ram from the bios to runs at ddr333 ,not at ddr400,and then you could
increase na FSB more than 239.And of course you should buy a better ram for better results 8)

 

[BOSS]

Hey rockman_ , The DDR`s are in 333MHZ (i`m not that stupid to use 400 mhz and i know that kingstone value ram cannot handle more than 200mhz , But thanks for the tip
OK , Now Tell me about the voltage !! the AGP Voltage is 1.5 by defaulf , is it good to make it to 1.6 ?
and another thing is the Cpu Voltage in MSI K8N Neo2 can be upgrade by % (such az 3.3% and 5% and 10 % ...)
i use +5% and the 1.6 volt for AGP and dafault memory ram(2.6)
and the limit of the system is 239x9 SO :
1-is the voltage good or too high or low ?
2-the mobo manual says that dont change the memory voltage for long term use !! is it true ?
3-when i turned on the aggressive timing system didnt go to windows (fatal error) , why is that ?
4-239x9=2150 with stock cooling the temp is about 43 , so is the overclocking good or bad ?
5-any other suggestion ?...

 

[vishusmartishus]

Are you sure it's stable if you're running it 9mhz under boot failure?