Anyone with mobile barton have this problem?

lwj81

Distinguished
Sep 28, 2001
187
0
18,680
0
NF7-S and 2600+ mobile barton.In bios i no longer have system default setting under CPU operating speed,just user defined.I pushed it too far,(needed a little more vcore)and it wouldn't post.Couldn't reset cmos because of this.Had to reinstall 1700+ to reset bios.Just wondering if you guys have this problem.
 

potsy

Distinguished
Jan 13, 2004
58
0
18,630
0
couldn't you just remove the mobo battery to reset the CMOS?

AMD XP-M 2600+ @ 2.6Ghz (12x216 @ 1.8v)
Gigabyte GA-7N400 Pro2
Geil 2x256MB PC3200 (2-3-3-11)
Gigabyte Radeon 9200 128MB VIVO
WD 36GB 10,000RPM 8MB SATA
Maxtor 40GB 7,200RPM 8MB ATA133
 

lwj81

Distinguished
Sep 28, 2001
187
0
18,680
0
No,tried that but this cpu doesn't seem to have a default speed in the bios,only user defined.When i first installed it,it posted as 600mhz,i went to 200x13 posted fine.I later tried 200x14,but my board only allows 1.85V it wouldn't post with that,but i could unplug the power and get back into bios.Tried 215x12.5 thats when nothing would work except reinstalling the 1700+.
 

potsy

Distinguished
Jan 13, 2004
58
0
18,630
0
well, there is a way you can mod your chip or cpu socket so that the board thinks its a 200FSB chip...here is a link to a thread about it. I did it with mine, and it automatically boots up at 200FSB, not 133FSB. It was really easy, just use 2 short parts of a wire to connect 2 socket holes. I dont know if this will help you with your problem, but i guess it couldnt hurt.

<A HREF="http://forums.amdmb.com/showthread.php?s=&threadid=298163" target="_new"> link </A>



AMD XP-M 2600+ @ 2.6Ghz (12x216 @ 1.8v)
Gigabyte GA-7N400 Pro2
Geil 2x256MB PC3200 (2-3-3-11)
Gigabyte Radeon 9200 128MB VIVO
WD 36GB 10,000RPM 8MB SATA
Maxtor 40GB 7,200RPM 8MB ATA133
 

Similar threads


TRENDING THREADS