Aptio Setup Utility

[Dvmth40]

The prior example is not working for my laptop. Do you know any other fixes for the Aptio issue?

 

[webworkings]

You do realize you didn't include any prior example, nor post on a thread with any example. Have you tried this....

Try the following and see if it resolves the problem.

1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".

2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".

3. Now select "Save & Exit" and press "yes".

4. Once you have done this, hold down the "power" button until the laptop turns off completely.

5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".

6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".

7. Choose "System Restore" and select a date prior to when the problem started.

The computer should now go through the restore process and then start normally for you.

 

[Dvmth40]

You do realize you didn't include any prior example, nor post on a thread with any example. Have you tried this....

Try the following and see if it resolves the problem.

1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".

2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".

3. Now select "Save & Exit" and press "yes".

4. Once you have done this, hold down the "power" button until the laptop turns off completely.

5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".

6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".

7. Choose "System Restore" and select a date prior to when the problem started.

The computer should now go through the restore process and then start normally for you.

 

[Dvmth40]

I've tried this several times with no luck. Any other suggestions?

 

[webworkings]

What happens when you try it?

 

[Dvmth40]

What happens when you try it?

 

[Dvmth40]

It just returns to the aptio setup utility. I've tried holding the f9 down as well. It states load optimized defaults.

 

[webworkings]

Did you make any changes to BIOS before this occurred?