Are my i7 temperatures normal?

[kaywalker]

Hey guys

My idle temperatures are 38-40 celsius and ~60 degrees under prime95 tests.

my system info is:
mugen 2 heatsink
intel i7 920 D0 stepping
gigabyte ud3r
cpu voltage: 1.31 volts
qpi: 1.3
hyperthreading disabled

My idle seems a bit high but I thought I'd check with you guys.

 

[kg4icg]

Yes they are normal, and depending on ambient temps and airflow inside your case. I currently have the same setup with mine clocked at 3.2ghz with the voltages at 1.2 volts with HT enabled and turbo on running a EL WU, with my temps reaching 68'C under heavy load being cooled by a CoolerMaster Hyper N520 hsf.

 

[kaywalker]

Thanks for the response kg4icg

I have a HAF 922, with the stock 240mm and a 240mm on the side and a scythe ultra kaze blowing in, and 2 slipstreams and an ultra kaze blowing out. Ambient is ~23. My load temps seem very good but more opinion on the idle please!

 

[kg4icg]

The idle is fine because of the voltage which i take you have it clocked up a bit. Mine sits at 32 to 38 depending on my room temp at the time.

 

[CompuTronix]

Test Setup
* Case covers open
* All fans 100% RPM
* High-end air cooling
* Standard Ambient 22c

i7 9xx @ stock - Idle - Task Manager < 1% usage 10 minutes
Low temps:
CPU 25c
Core 29c

i7 9xx @ overclocked - Load - Prime95 Small FFT's 10 minutes
High limits:
CPU 68c
Core 73c
Vcore 1.375

Core temperatures are "mean" or average values.

 

[dannymac63]

I'm in the same boat. Been running Prime95 for an hour. The temperatures were the max of any of the 4 cores for both idle and full load. I made sure to have HT on and 8 threads going in Prime95.

i7 920 @ 3.6 (D0)
Mugen 2 (AS5)
Asus P6T Deluxe V2
BLCK 180 x 20
Vcore 1.2
QPI/DRAM 1.2

100% Load on 8 cores: 62c
Idle: 40c
Ambient: 21c (70f)

I'm assuming it's within range. I hope it helps provide some sort of comparison.

 

[kaywalker]

dannymac63

Your voltages seem really good for 3.6ghz. Unfortunately I wasn't able to get stable results lowering the voltage anything below 1.3 for vcore. Oh well it's still tons below maximum voltage recommended so I guess i'm good

 

[mizzl]

Hehehe
Scythe Mugen 2
i7 920 D0 @ 3.7Ghz
Vcore 1.15
Max temp load: 59c
^^

 

[kaywalker]

hmm is that stable mizzl? also what's your idle?