- Apr 25, 2014
- 20
- 0
- 10,520
Good evening everybody,
Following this thread I've now replaced the hdd with a new Seagate ST1000DM003 and have a total of 6GB ram. Please, let me briefly remind you the system configuration:
Back then, I was hoping the main source of trouble was the hdd but now I suspect the mobo is junk too since the system performance is bad even after the improvements mentioned above.
Before, I make any final decisions I wonder if anybody could help me interpret the results of CrystalDiskMark (3.0.3x64) shown in the following screenshot. Are they expected or acceptable for a system such as mine?
Thank you very much in advance.
Following this thread I've now replaced the hdd with a new Seagate ST1000DM003 and have a total of 6GB ram. Please, let me briefly remind you the system configuration:
GA-78LMT-S2 mobo (only supports 3GB/s SATA)
AMD FX-4300 3.80GHz
6GB DDR3 1066 RAM
SEAGATE ST1000DM003
Windows 7 64bit Ultimate
Back then, I was hoping the main source of trouble was the hdd but now I suspect the mobo is junk too since the system performance is bad even after the improvements mentioned above.
Before, I make any final decisions I wonder if anybody could help me interpret the results of CrystalDiskMark (3.0.3x64) shown in the following screenshot. Are they expected or acceptable for a system such as mine?
Thank you very much in advance.
Facebook
Twitter
Instagram