Are these voltages ok?

[sergiuskater]

I have a seasonic s12 520 and i see in bios that i have 12.384v on 12v rail, 5.080v on 5v rail and 3.392v on 3.3v rail.
My question is: are these voltages ok for this psu?

 

[jwcrellin]

Yeah, they may dip a lil into the advertised range when under load. What else is in your pc?

 

[sergiuskater]

Im running an i5 6600 gtx 1070 and 8 gigs of ram and two fans, i dont think its a too much load on it

 

[Eximo]

Well within tolerances. Under load you may see it sag, but it shouldn't go below the spec.

ATX standard:
12V: 11.4 - 12.6v
5V: 4.75 - 5.25v
3.3V: 3.135 - 3.465v

-5V: 4.5 - 5.5v, likely not on any recent power supplies(ISA BUS).
-12: 10.8 - 13.2v, not really used by recent computers, but still in the standard (RS-232 Serial Ports).

 

[sergiuskater]

Well within tolerances. Under load you may see it sag, but it shouldn't go below the spec.

ATX standard:
12V: 11.4 - 12.6v
5V: 4.75 - 5.25v
3.3V: 3.135 - 3.465v

-5V: 4.5 - 5.5v, likely not on any recent power supplies(ISA BUS).
-12: 10.8 - 13.2v, not really used by recent computers, but still in the standard (RS-232 Serial Ports).

So do u think these are healthy voltages ?

 

[Eximo]

Yes. Ideal really, you want a little extra to combat sudden load increases.

Are you experiencing trouble that you think these voltages explain?