ASRock 960GM-VGS3 FX With Kingston ValueRAM 4GB DDR3 1600MHz CL11 SR x8

[XadarxBlack]

Ok this MB ASRock 960GM-VGS3 FX supports Ram at 1600 MHz only O.C :/
so i have Kingston ValueRAM 4GB DDR3 1600MHz CL11 SR x8 and i wanna O.C the RAM ... but i don't know how to O.C Ram at all ,and i wanna buy one more so that i will have 2x4GB 1600 MHz , so i wanna know if i can O.C both Ram.

This is my video care i will use Sapphire Radeon R7 250X 1GB DDR5 128-bit
And this is the Processor if i use Processor AMD FX-6300 3.5GHz

All the parts are new ... just bought them Yesterday, i didn't had enough money to buy a better MB,
and i hope it won't be a problem i will use a PSU with 400W :3

 

[kingstonhq]

Hi, I'm Jewel with Kingston Technical Support and would like to offer our assistance. Kingston ValueRAM is not meant for overclocking and will most like run at the lower speed supported by your motherboard and CPU. The CPU has the memory controller build into it and the AMD FX-6300 3.5GHz actually supports up to 1866MHz, so the memory may run at 1600MHz when installed. If not you may be able to change the timings and frequency in the BIOS. If you want to overclock without making any timing changes you can try out HyperX Fury memory which is designed as PnP overclocking memory. It will run at the highest setting the system supports when installed. You can check that out here: http://www.kingston.com/us/hyperx/memory/fury

Thanks for choosing Kingston as your upgrade partner.