Question ASRock AB350M-HDV No POST

mariowbr

Commendable
Jan 14, 2019
23
0
1,510
0
Hi guys, I changed the SSD M2 from my setup to one with a bigger capacity and I can't turn on the computer anymore;
I replaced the old M2 with the new one, turned on the computer, entered the bios and set to connect through the pendrive of the windows installation;
After that, the computer turns on, but with no video, not POST screen and the MB 4 beeps;
I can't put the old M2 with the old system because I had already installed it on a notebook, formatted and reinstalled the windows;
I've tried to take out the RAM, change slots without success;
I have 2 SATA HD and 1 SSD on this computer in addition to the M2, I pulled off everything and follows the same error;
I already tried Clear CMOS, I left 1 day without battery and disconnected from all power source also without success;
I'll pass my setup below to illustrate and see if someone can give me a hand!

ASRock AB350M-HDV
Ryzen 5 1600
RX 580 Gigabyte
SSD PNY CS3030 500GB M.2
X2 Adata Xpg Dazzle 8gb Ddr4 2400mhz

Does anyone have another idea of how the PC could at least POST ?? Thanks!
Sorry for the bad english, i'm brazilian!
 

ASK THE COMMUNITY

TRENDING THREADS