asrock b250m-hdv support

[abhi471990]

will asrock b250m-hdv work with
Intel pentium g4560
8gb ddr4 2400mhz ram
Zotac amp gtx 950 (2 year old)
Cooler Master Extreme Power plus 460w psu (7 year old)
Wd blue 1tb hdd

Earlie i was going to buy ASRock H110m-HDV mobo but then i found out it only support ddr4 2133mhz ram and g4560 performer equals to i3 6100 only with 2400mhz ram so will this mother board support 2400mhz ram and all my other parts. Can this cpu last me 3-4 years as i only game at 1366x768. Thanks

 

[Ecky]

It will all work, but unless I'm mistaken, all socket 1151 boards will run DDR4 at 2133mhz by default, which is fine - you need an expensive Z270 board to run RAM any higher, and the gains are not big. You might want to spend just a little more to get a board with 4 RAM slots, to make upgrading easier in the future.

EDIT: As to whether it will last you 3-4 years, that depends on what your expectations are, and what happens over the next 3-4 years. I don't have a crystal ball. However, I will say that the resolution you run has absolutely nothing to do with CPU load. A Pentium G4560 is capable of delivering the same framerates at 4k as at 720P, only your GPU load is different.

 

[abhi471990]

It will all work, but unless I'm mistaken, all socket 1151 boards will run DDR4 at 2133mhz by default, which is fine - you need an expensive Z270 board to run RAM any higher, and the gains are not big. You might want to spend just a little more to get a board with 4 RAM slots, to make upgrading easier in the future.

EDIT: As to whether it will last you 3-4 years, that depends on what your expectations are, and what happens over the next 3-4 years. I don't have a crystal ball. However, I will say that the resolution you run has absolutely nothing to do with CPU load. A Pentium G4560 is capable of delivering the same framerates at 4k as at 720P, only your GPU load is different.

thanks for reply man

i was just checking asrock website and http://www.asrock.com/MB/Intel/B250M-HDV/index.asp and here they say it support 2400mhz ram. So thats why i was asking and z270 is so highly priced in my country lol i could get an i5 6400 + H110m board in the price of 1 z270 board. I am on serious budget man

 

[Ecky]

Yeah I don't recommend a Z270 board. Rather, I suggest not worrying about it. I'm not entirely certain if you'll get 2133mhz or 2400, but in reality the difference between the two will be so small that I doubt you'll perceive it.

 

[rgd1101]

200 series can run at 2133 or 2400, if you have a 7 gen cpu, it will run at 2400, 6 th gen cpu will run at 2133
is right at their spec page
http://www.asrock.com/MB/Intel/B250M-HDV/index.asp#Specification