I purchased the Asrock Fatality AB350 Gaming K4.....AMD x4 950 cpu.....and Patriot Viper DDR4 3200mhz 4x 4GB sticks.
As of now BIOS 2.5 is currently running. Anything above 2.5 such as 2.6/3.0/and 3.2 take forever to get through post screen with no components working such as USB,Ethernet,etc. It does not go into a boot loop but it will restart again 1x after BIOS is updated then it will slowly get through the post screen which takes about 3-4 minutes then pops the Windows Login screen with no USB/Components working...so no keyboard/mouse/ethernet.
So I had to refer back to BIOS version 2.5 with 4 ram dimm slots occupied which caused the same issue of long post time, no usb, no ethernet,etc. so i removed 2 sticks of ram and it booted just fine. Shutdown....added the other 2 sticks.....now it boots.
ANOTHER issue I am having is......with this RAM....NONE of the bios versions show DRAM Configuration settings. It just says XMP Profile 2.0 blah blah with nothing to click on in the OC Tweaker menu. BIOS memory timings says its running at 1866mhz. Windows says 1067mhz. CPU-Z says 1297.4mhz.
Im only paying attention to what the BIOS is telling me so 1866mhz is far off from 2400mhz that the CPU allows. Yes this AMD x4 950 only allows DDR4 2400mhz.....i purchased 3200mhz knowing it will down clock to which i assumed 2400 but no......definitely not working that way. I'm baffled. Asrock said they would send me a new board if I had a receipt but .... meh!
Asrock technical support guy said I needed bios 3.2 to be able to change dram configuration settings......even when i waited for my keyboard to work through the long post times to hit the DEL key to enter bios(which eventually disables usb,ethernet after exiting post and entering windows loader).......im lucky to be able to enter the bios with the USB only working a short time during post......so yeah NONE of the bios versions shows a DRAM configuration menu to change settings.
Hmmm......LOL
Anybody with these issues?!
As of now BIOS 2.5 is currently running. Anything above 2.5 such as 2.6/3.0/and 3.2 take forever to get through post screen with no components working such as USB,Ethernet,etc. It does not go into a boot loop but it will restart again 1x after BIOS is updated then it will slowly get through the post screen which takes about 3-4 minutes then pops the Windows Login screen with no USB/Components working...so no keyboard/mouse/ethernet.
So I had to refer back to BIOS version 2.5 with 4 ram dimm slots occupied which caused the same issue of long post time, no usb, no ethernet,etc. so i removed 2 sticks of ram and it booted just fine. Shutdown....added the other 2 sticks.....now it boots.
ANOTHER issue I am having is......with this RAM....NONE of the bios versions show DRAM Configuration settings. It just says XMP Profile 2.0 blah blah with nothing to click on in the OC Tweaker menu. BIOS memory timings says its running at 1866mhz. Windows says 1067mhz. CPU-Z says 1297.4mhz.
Im only paying attention to what the BIOS is telling me so 1866mhz is far off from 2400mhz that the CPU allows. Yes this AMD x4 950 only allows DDR4 2400mhz.....i purchased 3200mhz knowing it will down clock to which i assumed 2400 but no......definitely not working that way. I'm baffled. Asrock said they would send me a new board if I had a receipt but .... meh!
Asrock technical support guy said I needed bios 3.2 to be able to change dram configuration settings......even when i waited for my keyboard to work through the long post times to hit the DEL key to enter bios(which eventually disables usb,ethernet after exiting post and entering windows loader).......im lucky to be able to enter the bios with the USB only working a short time during post......so yeah NONE of the bios versions shows a DRAM configuration menu to change settings.
Hmmm......LOL
Anybody with these issues?!