ASRock FM2A68M-HD+ Doesn't Display Video

KMC_Hurricane

Commendable
May 20, 2016
3
0
1,510
I've tried the HDMI, DVI and VGA ports on the mobo, in all cases multiple monitors tell me no signal found. I would assume it was the motherboard, however this is the second one I have for this build after sending back the first one (a different brand) for the same reason so I feel like it is something I am doing. In each case, the computer boots and all hardware connected to the mobo (CD drive, fans etc) are getting power and working.

What I've tried/know so far:
Tested the RAM sticks on a working computer, and used known working RAM on this build.
With no RAM installed the mobo does NOT beep.
Both the power connectors for the board and CPU are connected.
VGA, DVI and HDMI display no video, used multiple cables for each.

I'm not sure if there is something I am just forgetting or if its another part that could be the issue.
 
What CPU/APU are you using? I had a problem like this before. Turns out that newer boards require an APU to get the on board graphics working.

Without an APU the computer will still work, but you will need an independent graphics card.
 


Went through the entire checklist, still got nothing.