ASROCK H61M-DGS bluescreen after graphic-driver install

[Guest]

Hi guys, just build up a tower for a friend with an ASROCK H61M-DGS R2.0 mobo, an i5-3450@3.1, one 4GB ram, one 300 GB hard-drive (c=100, d=200), two DVD-ROM and his win 7 ultimate.
So far so good, setting a recovery point and install the missing drivers from the driver disk IIH61E-15. After the graphik-driver and the restart for some seconds it looked good and then dark screen followed by a bluescreen.
Anybody an idea what is wrong?

 

[Phillip Corcoran]

Boot in to safe mode and remove Realtek graphics driver.
PC should now boot in to normal mode with default graphics driver.

Now download latest graphics driver from ASRock: http://www.asrock.com/mb/Intel/H61M-DGS%20R2.0/?cat=Download

 

[Guest]

Boot in to safe mode and remove Realtek graphics driver.
PC should now boot in to normal mode with default graphics driver.

Now download latest graphics driver from ASRock: http://www.asrock.com/mb/Intel/H61M-DGS%20R2.0/?cat=Download

Thanks for your answer Phillip, I'll try this tonight.
Dieter

 

[Guest]

I tried it last night without success. The same <mod edit> than last time. Because I found out the mobo was build in 2002 and the UEFI is from 3-4 years before, a new UEFI will be necessary.
Somebody any advices? Except the electricity.

<Watch your language in these forums>

 

[Guest]

after trying the driver update once more the blue-screen did not vanish and I could take a picture.

someone there can tell me what it means?