Asrock p67 pro fatal1ty Confusing Readings

[Andy JWM]

Hi guys, back again for some valuable advice.

I have rebuilt my system after having to RMA my cpu and bought a new mobo. Everything seems to be ok as far as OC goes, stable @ 4ghz@1.184v prime 95 8 hour blend test.

The real difficulty I'm having is figuring out the voltage sensors on this mobo, I cannot seem to find my Dram voltage. http://tinypic.com/r/neb0h2/8[/img

on hwmonitor vin 4,5,6 match up with speedfan vin 1,2,3
on hwmonitor vin 4,6 match up with hwinfo64 vin 4,6

That leaves me with vin5 (hwmonitor)/vin2 (speedfan) @ 1.66v which is an unknown to me.
Both the bios and f-stream report dram @ 1.35v ( I manually set low to make a point)

If anyone has any insight it would be greatly appreciated, I realise I'm probably being paranoid.

 

[GhislainG]

DRAM voltage (1.35 V) is indicated in the Fatal1ty screen.

 

[Andy JWM]

DRAM voltage (1.35 V) is indicated in the Fatal1ty screen.

Yes I am aware of what f-stream says, because I manually set that myself and said so in the post. The issue I cannot find any correlating voltages elsewhere and have a rogue voltage. All this was explained initially, please re read my post.

 

[GhislainG]

Other than F-Stream, tools aren't designed to read the DRAM voltage. Fortunately it isn't required since we already know what it is from the BIOS and from F-Stream.

 

[Andy JWM]

F-stream mirrors the bios. It is windows level access to the bios. If there are no other sensors to read dram then fair enough. However that still leaves me with a rogue voltage I cannot account for. The problem was unaccounted voltages, eliminating the dram gets me closer to the solution but not all the way.

 

[Andy JWM]

Thanks for your input, I'm going to go voltage hunting with a multimeter.

 

[GhislainG]

Thanks for your input, I'm going to go voltage hunting with a multimeter.

That's a good idea.