ASRock Z170 Pro4S No post, no display, all fans running

[jessesuave]

So I got all these parts today threw them together (I've done tons of builds before this so this isn't new to me) and there's no post, no display, nothing but fans running and the fans that have LEDs the LEDs are on.

Components are as listed here on pc partpicker: http://ca.pcpartpicker.com/list/Y4kH4C

I really would love any help I just cannot figure this out and I am desperate to get this beast built.

I will be bread boarding tomorrow to figure out if my Mobo is dead or not but any suggestions are welcome.

 

[bgunner]

If you do not have one pick one up and install a "case speaker" this little speaker usually connects down near the front panel header. This will give you trouble code beeps to help in the diagnosis of your issue. Not to mention is usable in your next build and the next and so on. Cost $5 USD.

 

[jessesuave]

Yeah I'll probably have to pick one up.

 

[jessesuave]

SOLVED!!!!! ANYONE WITH A 212 EVO with this issue loosen the screws holding it onto the backplate a bit worked for me!

 

[bgunner]

The Issue is not with the cooler but the installer of the cooler tightening it to much. This in itself is a common issue. I have this cooler, it is not the cooler at fault.

Glad you tracked it down because it can take a while to find that issue.

 

[MuffinSeeker]

SOLVED!!!!! ANYONE WITH A 212 EVO with this issue loosen the screws holding it onto the backplate a bit worked for me!

Thankyou so much for this. My boyfriend and I built a PC today and we were just about to give up and send it to a repair shop. I knew it would be something simple and stupid!