Asrock Z87 Extreme 4 DrDebug Code b2

[BLUuuE]

Well after I flashed my Sapphire 7850 to Asus 7850 bios (to get up to 1.3v) my computer wouldn't boot and gives a DrDebug code of 'b2'. I couldn't find any info about it in the manual nor the Internet... Is it because I flashed my 7850 bios?
I have the original bios saved onto my USB so is it possible to re-flash the original?

 

[johnnyp23]

I have a z77 extreme6 my manual says "B2" means legacy option ROM initialization. I don't know what that means though.

 

[Ponyface]

read this forum: http://www.overclock.net/t/1320403/b2-legacy-option-rom-initialization-error-with-7950

try re-seating your card and make sure it is supported well enough where it is secured to your case so it is not leaning to one side of the pci express slot.

 

[BLUuuE]

read this forum: http://www.overclock.net/t/1320403/b2-legacy-option-rom-initialization-error-with-7950

try re-seating your card and make sure it is supported well enough where it is secured to your case so it is not leaning to one side of the pci express slot.

Before I flashed the GPU bios my graphics card was working perfectly. I doubt its the problem with how my graphics card is seated, but I'll give it a shot.
Thanks

 

[BLUuuE]

I reseated the graphics card and it still gives me same error code 'b2' Any ideas?
I took out the graphics card and let it boot with the iGPU on the 4770k. Is there any way to disable the dedicated graphics card at startup?

 

[BLUuuE]

Its's fixed now
http://www.tomshardware.com/answers/id-1991317/set-igpu-primary-bricked-gpu.html#12503145