Dears,
before i have posted this i went through the sticky posts and ensured to do the check lists. what happen is that i was trying to update my BIOS so i went to the official Asrock website and downloaded the windows installer, so i opened the file to install and a black window showed up then it told me that i cannot install the update and i have to install it using instant flash, then i downloaded the instant flash zip file then restarted my PC to go to BIOS and then the issue started!! after restart there is no video output at all
What did i do to test ?
- i made sure all cables connected correctly.
- i removed one ram out of two, then switched the ram with the other to make sure it is not the ram.
- i removed the cmos battery.
- i reset the cmos pin (1,2 > 2,3).
- i removed the GPU and attached the HDMI directly to the board.
- i tried VGA cable.
- i removed all the USB connected to the pc.
- i removed all SATA attached to the MOBO.
- i tried different Monitor
and sadly non of this worked.
PC SPECS:
ASROCK Z87 EXTREME3 -LGA1150 Intel Z87 Chipset DDR3 Quad CrossFireX Quad SLI SATA3 USB3.0 ATX Motherboard
Intel Core i5-4670K Quad-Core Desktop Processor 3.4 GHZ 6 MB Cache - BX80646I54670
Sapphire Radeon Vapor-X HD 7950 OC with Boost 3 GB DDR5 DL-DVI-I/SL-DVI-D/HDMI/DP PCI-Express Graphics Card 11196-09-40G
before i have posted this i went through the sticky posts and ensured to do the check lists. what happen is that i was trying to update my BIOS so i went to the official Asrock website and downloaded the windows installer, so i opened the file to install and a black window showed up then it told me that i cannot install the update and i have to install it using instant flash, then i downloaded the instant flash zip file then restarted my PC to go to BIOS and then the issue started!! after restart there is no video output at all
What did i do to test ?
- i made sure all cables connected correctly.
- i removed one ram out of two, then switched the ram with the other to make sure it is not the ram.
- i removed the cmos battery.
- i reset the cmos pin (1,2 > 2,3).
- i removed the GPU and attached the HDMI directly to the board.
- i tried VGA cable.
- i removed all the USB connected to the pc.
- i removed all SATA attached to the MOBO.
- i tried different Monitor
and sadly non of this worked.
PC SPECS:
ASROCK Z87 EXTREME3 -LGA1150 Intel Z87 Chipset DDR3 Quad CrossFireX Quad SLI SATA3 USB3.0 ATX Motherboard
Intel Core i5-4670K Quad-Core Desktop Processor 3.4 GHZ 6 MB Cache - BX80646I54670
Sapphire Radeon Vapor-X HD 7950 OC with Boost 3 GB DDR5 DL-DVI-I/SL-DVI-D/HDMI/DP PCI-Express Graphics Card 11196-09-40G
Facebook
Twitter
Instagram