I’ve got a problem with my Asus B250 motherboard. I had a previous board that worked flawlessly with 9 cards for 3 months. I moved the rig recently and it fried the mobo when I hooked it back up... Anyway I’ve ordered a new one and I was initially having problems with some of the GPUs booting normally but others where the fans just keep spinning which is usually a riser issue. I decided to go from 4 PSU to 3 PSU in case it was an issue there with power balance etc. Still no luck. Last night I managed to get everything hooked up nicely and it seemed to like it to begin with but it booted to a black screen with cursor in top left corner. I reset by removing battery, turned on and now it gives me nothing on screen. Fans and CPU appear to be on but just nothing...
As a sidenote, i've already returned the new board for a second new one and the same issues, so ruling out the mobo being the problem.
Heres my setup;
1000W EVGA PSU – CPU, SSD, 3 X Radeon Vii & 1 X Vega 64, risers for these GPUs and molex to PCI ports on board, I know people say you don’t need these with powered risers but when my rig was working it would only boot with these plugged in.
750W EVGA PSU – 2 X Radeon vii and risers
750W EVGA PSU – 3 X Vega 64 and risers
I've tried plugging all PSUs into board and now i've left it how I originally had it with Add2psu from 1000W PSU which is powering the board plugged into 'A'.
Ram – Ballistic 8gb 2666 Mhz
Really appreciate any help, it's driving me insane!
As a sidenote, i've already returned the new board for a second new one and the same issues, so ruling out the mobo being the problem.
Heres my setup;
1000W EVGA PSU – CPU, SSD, 3 X Radeon Vii & 1 X Vega 64, risers for these GPUs and molex to PCI ports on board, I know people say you don’t need these with powered risers but when my rig was working it would only boot with these plugged in.
750W EVGA PSU – 2 X Radeon vii and risers
750W EVGA PSU – 3 X Vega 64 and risers
I've tried plugging all PSUs into board and now i've left it how I originally had it with Add2psu from 1000W PSU which is powering the board plugged into 'A'.
Ram – Ballistic 8gb 2666 Mhz
Really appreciate any help, it's driving me insane!