Asus b85m-g no display

L Helps

Honorable
Jan 4, 2013
737
0
11,060
Hello everyone,

I finished my build with these specs:

i5 4440
Asus B85M-G
kingston hyper x fury 2x4gb 1866mhz
seasonic m12ii evo 520
-----
Gigabyte gtx 960 4gb
1tb seagate 7200rpm
zalman z9

There is no signal on my monitor(tested on two monitors using hdmi and vga)

I had the gtx 960 in the system first but when there no signal(using hdmi) I took it out and tried to plug my monitor in using the hdmi and vga on the motherboard.

-Already tried every ram slot
-resetted the bios
-switched the mobo(same asus board since im building 2 systems)
-switched psu(I have a g650m for the other build)
-switched cpu(also i5 4440)
-made sure every cable was connected and there were no mobo standoffs shorting the mobo
-ran the system with the minimal setup (cpu,ram,mobo everyting connected to psu ofcourse)

probably getting another mobo to test if the mobo's are faulthy and sending the asus boards back.

Does anyone have another solution?

Edit: Forgot to mention all fans are running. I don't have a motherboard speaker at the moment.
 
check the mb serial number the last four digits if there 0501 the mb should post that the min bios number for that cpu. wiht 1866 and a high end gpu try booting with no gpu and one ram stick in slot a0. also make sure the 8/4 pin atx power connector is plugged in. check that the mb is sitting on top of all of the standoffs and that the io shield or mb tray not shorting the mb out. with the other mb and cpu try posting it on top of the mb box.