Asus: CPU Code A0 but Boot LED error

[deeplearningplease]

Hi all,

Having some issues with a new build.
As the title mentions, I am receiving the q-code A0, which I have read means "just fine". However, the Q-LED remains yellow (BOOT error) and my GPU projects nothing to my scree, I have tried every possible output slot on the GPU and PICe slot on the mobo.

Motherboard: ASUS x399 Zenith Extreme
CPU: AMD Threadripper 1900
CPU Cooler: Noctua U14S
GPU: Auros 1080ti
RAM: GSkills V 1 stick 16GB
Storage: 860 evo 500GB (x1), 3TB Toshiba HDD (x3)
PSU: Seasonic 1000W Titanium+

 

[rocktalkrock]

Double check page 1-5 of your motherboard manual to make sure your RAM is installed in the correct slots. Make sure the sticks are pushed all the way down in their slots, at both ends.

 

[shknawe]

Please list all specs of your new build, I.e. MEMORY, PSU, SSD, M2, cooling ETC thanks.

 

[deeplearningplease]

Please list all specs of your new build, I.e. MEMORY, PSU, SSD, M2, cooling ETC thanks.

Updated

 

[rocktalkrock]

Have you updated your motherboard to the latest drivers and BIOS?

ROG ZENITH EXTREME - BIOS Version 0305 - 2017/08/04
1. Fix System hang when using both DIMM.2 and VGA Card
3. Revised some VGA may hang 0xAF0E when CSM disabled.

 

[shknawe]

Try reseating your psu to motherboard plug, also try backing off a few turns of the screws on your cooler plate to the cpu and reboot see if that helps. I had same problem when I ADDED A COOLER AND CRANKED IT DOWN TOO HARD.