[SOLVED] Asus DSL-AC51 cant work with my TD LTE WAN

Nov 28, 2018
9
0
10
DSL model:ASUS AC51

first,connected my TD-LTE modem in port 1 and power up Asus modem,after checking thing , i have ping and i can use the internet without any problem,but in the network map section > internet status : Disconnected.
with this situation i cant use dual wan . when i try to set up DSL connection and use my hole connection going down . no internet , no ping from every where.
ill do this set up revers and try to use the dual wan,but every time my TD LTE connection didn't define as a wan or connection.
 
Solution
Looking at the PDF for your LTE "modem", I believe it is a router, since it has WIFI and phone ports. I am guessing that the private IP address provided by that device and the LAN IP addresses provided by the Asus are in the same range. That would mess things up.


I dont know.i sent here guid of tis product
 
this list you send , all of them are USB LTE modem. my DSL ac51U didn't have USB port for connect this devices.i want use my ADSL2+ and Ethernet wan(dual wan) (TD-LTE Air master3000M Lte-WiMAX )
 


its not important to me what wan goes to primary,i tried both of this options,not working
 


before connecting secound wan yes.its working.now im using DSL.when im going to dual wan hole internet connections gos to Disconnect
 
Looking at the PDF for your LTE "modem", I believe it is a router, since it has WIFI and phone ports. I am guessing that the private IP address provided by that device and the LAN IP addresses provided by the Asus are in the same range. That would mess things up.
 
Solution


Yes, you kept saying "modem" when it wasn't a modem. It was a router. That is one of the things that confused me, and I kept asking about USB. LTE modems are generally USB devices. By setting bridge mode you made it into a modem.