Asus F2A55-M CSM Dram led blinking

[barterking85]

I have an asus f2a55-m csm motherboard it's a new build and I can't boot into my bios my ram is Kingston hyperX khx1600c9d3k2/8gx on PC part picker it says it's compatible but in my motherboard manual it says khx1600c9d3k2/8gx (xmp) the same thing but it includes those last 3 letters. When I turn it on my dram led blinks and memok! Button does nothing.

So I tried booting with both in a1 & b1 slots, tried just 1 stick in the a1 slot(tried both sticks), and I tried booting with no ram and my system speaker beeps so my mobo is still good.

What's going on?

 

[romirez]

Try another ram, prefer from QVL with exactly model.

 

[barterking85]

The problem was the onboard graphics once I installed a video card it booted right up.

 

[romirez]

So, integrated video is still a problem?
It may be CPU.

 

[barterking85]

Not anymore I needed to boot so I could install the drivers now integrated video works fine I also clead the CMOS before I added the video card so that may have helped too. I would say having a temporary video card is the answer though.