ASUS G10AJ - VCCIN / Motherboard Temp High

[Guest]

A couple months ago I purchased an ASUS G10AJ desktop. A few weeks ago, I installed Speccy and noticed that the motherboard was running very hot (115C). In trying to figure out what was going on, I opened up AEGIS and saw that the VCCIN was running high (~1.7v). Screenshots are below. These were taken today, shortly after starting up the computer.

Might that explain Speccy's high reading? Additionally, is that a problem? Everything else appears to be fine and my computer runs well...just want to make sure this is okay and won't cause long-term problems.

Speccy screenshot

AEGIS screenshot

Thanks in advance for any help/guidance.

 

[Y0GI]

A couple months ago I purchased an ASUS G10AJ desktop. A few weeks ago, I installed Speccy and noticed that the motherboard was running very hot (115C). In trying to figure out what was going on, I opened up AEGIS and saw that the VCCIN was running high (~1.7v). Screenshots are below. These were taken today, shortly after starting up the computer.

Might that explain Speccy's high reading? Additionally, is that a problem? Everything else appears to be fine and my computer runs well...just want to make sure this is okay and won't cause long-term problems.

Speccy screenshot

AEGIS screenshot

Thanks in advance for any help/guidance.

For such a new and expensive computer, I would contact Asus Tech Support for a solution. You may have something defective which needs to be addressed by Asus while it is still in warranty.

Yogi

EDIT: 1.7 v. for VCCIN is not too high.

Yogi